Home  -  Used Machines  -  Scorers  -  Stringing  -  Rackets  -  Tools  -  Free Software  -  Agents  -  Bearings

 

Thank you for visiting this page, UK buyers please use the ebay BEARINGS link below, any questions please email richard@shotmaster.co.uk  or ring me on 01753 654523 (day) - 01753 651923 (eve) 

I will try to beat any price from other bearing suppliers, just contact me to discuss.

To go the ebay UK bearing listing with close up pictures & information click here >>> BEARINGS

To go to my other ebay UK listings click here >>> EBAY

For outside the UK, orders are sent by recorded post or fully tracked courier and payment is by paypal, email at  richard@shotmaster.co.uk me with your choice and quantity of bearings and your location for a quote, or any questions. To view close up pictures of individual bearings click on the ebay UK bearing listing page link BEARINGS above.

These bearings are typically used for, medical equipment, optical instruments, printing machinery, food processing machinery, film processing, marine equipment, conveyer systems, sports equipment, modeling and lightweight applications. Suitable for clean, corrosive or aggressive chemical environments, good strength to weight ratio, lightweight, shock absorbing, vibration dampening, lubrication free, electrically insulating, non magnetic, quiet running, can be run submerged and can be washed down. Temperature range for the DBSS range is -40°C to +110°C, and PBGL range, which are acid/alkali resistant, is -10°C to +80°C

DBSS range, Delrin/Acetal races, nylon cages and 316 stainless steel balls.

DBSS-1  3300 off, 3/8" x 7/8" x 7/32" (8-12-2600)  £1.30
DBSS-2  450 off, 1/2" x 11/8" x 1/4" (12-15-1750, inner race offset by .025")  £1.70
DBSS-3  200 off, 1/2" x 13/8" x 7/16" (12-15-1800)  £2.30 
DBSS-4  82 off, 1/2" x 13/8" x 7/16" (12-15-1800, inner race offset by .020")  £2.30 
DBSS-5  156 off, 1/2" x 13/8" x 15/32" (18-24-1700, heavy duty, double row of balls)  £3.10 
DBSS-6  4150 off, 5/8" x 13/8" x 7/16" (14-17-1600, inner race offset by .025")  £3.30
DBSS-7  1800 off, 5/8" x 13/8" x 7/16", (19-23-1500)  £3.30 
DBSS-8  250 off, 5/8" x 13/4" x 15/32" (19-23-1500)  £3.30
DBSS-9  1225 off, 3/4" x 13/4" x 15/32", (24-29-1400)  £3.80
DBSS-10  950 off, 25mm x 52mm x 15mm, (29-37-1100)  £4.10 
DBSS-11  150 off, 1" x 2" x 1/2" (29-37-1100) £4.30
DBSS-12 "specials"  270 off, 1/8" x 13/8" x 7/16" (12-15-1800)  £2.30. These can be bored out to any size (max .600") ring or email me to discuss.

PBGL range, Polypropylene races, nylon cages and glass balls.

PBGL-1  450 off, 1/2" x 11/8"x 1/4" (13-16-1600, "white delrin", inner race offset by 0.020")  £1.40
PBGL-2  680 off, 1/2" x 13/8" x 7/16", (13-16-1600, inner race offset by 0.030")  £2.10 
PBGL-3  200 off, 1/2" x 13/8" x 7/16", (18-24-1600 heavy duty double row of balls)  £2.30
PBGL-4  138 off, 1/2" x 13/4" x 15/32", (18-24-1600, heavy duty double row of balls)  £2.70
PBGL-5  1950 off, 5/8" x 13/8"x 7/16", (18-24-1600)  £2.70
PBGL-6  650 off, 5/8" x 13/8"x 7/16", (18-24-1600, inner race offset by 0.030")  £2.70 
PBGL-7  750 off, 5/8" x 13/8" x 7/16", (18-24-1600, heavy duty double row of balls)  £2.70
PBGL-8  2187 off, 5/8" x 13/4" x 15/32", (24-29-1400)  £2.70
PBGL-9  2200 off, 3/4" x 13/4" x 15/32", (24-29-1400)  £3.30
PBGL-10 385 off, 25mm x 52mm x 15mm, (29-37-1100)  £3.70

I also have machining facilities so I can make and press fit and glue delrin/polyproperlene bushes externally or internally to all the bearings for special applications or to fit your existing equipment. 

As an example a delrin bearing of 5/8" x 13/4" x 7/16" could have a delrin bush of 2.375" dia pressed onto the OD and .500" bore bush pressed in to the bore and that makes it into a 1/2" x 23/8" x 7/16"

So any combination is possible. 
1. smaller bores and larger outside diameters 
2. just smaller bores
3. just larger outside diameters 

Also any bearing can be machined to have larger bores or smaller outside diameters, obviously the wall thickness of outer & inner will be thinner and will effect the strength of the bearing. 

But as an example a delrin 5/8" x 13/4" x .472" could be machined to .687" x 1.720" x .472"

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

Pillow block flange, 120 available, made from grey PVC will fit all 13/8" diameter bearings, , I have material and machining facilities to produce more and to fit other sizes in the range if required.

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

All plastic bearings are semi precision so inner and outer ring tolerances on these bearings are +/- .003"/0.1mm, so they may not be a press fit like normal steel bearings on shafts or in housings. This can be solved by using by using Loctite super glue for plastics, this is sold on Ebay for £3.60 just type "loctite super glue" in the ebay search box, or I can supply it with your order.